Free Curtain Size & Length Calculator — Find Curtain Width, Length, Rod Size & Panels

Use this free curtain size calculator by AstheticDecor.com to find the perfect curtain width, curtain length, rod or pole length, panel count, fabric quantity, and ready-made curtain size. Enter your window measurements and get a designer-style curtain recommendation in seconds.

✨ Free Tool by AstheticDecor.com ✨
Designer curtain measurements in seconds

Curtain Size & Length CalculatorMeasure smarter. Style your windows like a designer.

Find the right curtain width, curtain length, rod or pole length, panel count, fullness, fabric quantity, and ready-made curtain size with a warmer, more polished home decor experience.

Your measurements

cm / inches
Measure glass/trim width, not finials.
For long curtains and drapes.
Used for sill or apron length.
Higher rods make rooms feel taller.
More extension gives better stack-back.
Use 0 for plain fabric.
For fabric buying only. Ready-made curtain length is calculated without this extra allowance.

Your result

Live
Buy panels — Panel recommendation
Curtain length — Ideal drop
Rod / pole — Recommended length

How this curtain calculator works

This tool calculates the ideal curtain size from your window width, rod extension, heading style, fullness, and desired length. It also estimates curtain rod length, ready-made panel count, fabric quantity, pattern-repeat allowance, and stack-back space so your curtains look full instead of flat.

What size curtains do I need?

For most windows, choose total curtain fabric width around 2× the rod or pole width. Sheer curtains may need closer to 3× fullness, while heavy blackout curtains can often look good around 1.5× to 2×.

How long should curtain rods be?

A designer-friendly starting point is to extend the rod several inches or centimeters beyond both sides of the window. Use more extension for blackout curtains or heavy fabrics so the curtain stack does not block the glass when open.

Should curtains touch the floor?

For a clean modern look, curtains can hover just above the floor or lightly kiss it. A slight break or soft puddle creates a more relaxed, romantic style but is less practical in busy homes.


How to Use the Curtain Size Calculator

To use the curtain size calculator, first measure your window opening width. Then measure from the top of the window frame to the floor, sill, or the point where you want your curtains to end. Select your curtain heading style, such as eyelet, pencil pleat, pinch pleat, sheer, or rod pocket. The calculator will then suggest the ideal curtain width, curtain length, rod size, number of panels, and fabric quantity.


How to Calculate Curtain Width

Curtain width is usually calculated by multiplying the curtain rod or pole width by the fullness level. For a simple look, use around 1.5× fullness. For a fuller designer look, use 2× fullness. For pencil pleat, pinch pleat, wave curtains, or sheer curtains, you may need 2.5× to 3× fullness.

Simple formula:

Curtain width = rod width × fullness

Example:

If your rod is 80 inches wide and you want 2× fullness:

80 × 2 = 160 inches total curtain width


How to Calculate Curtain Length

Curtain length depends on where your curtain rod is installed and where you want the curtain to finish. For a modern look, curtains can slightly hover above the floor or just touch the floor. For a softer luxury look, curtains can slightly break or puddle on the floor.

Common curtain length styles:

StyleBest for
Sill lengthKitchens, bathrooms, small windows
Apron lengthCasual rooms and short windows
Floor lengthLiving rooms, bedrooms, dining rooms
Puddle lengthLuxury bedrooms and formal spaces

Curtain Rod Length Calculator

A curtain rod should usually be wider than the window. This gives your curtains space to stack on the sides when open and makes the window look larger. A good starting point is to extend the rod several inches beyond each side of the window. For blackout curtains, wider rod extension is better because it helps reduce side light gaps.

Simple formula:

Rod length = window width + left extension + right extension

Example:

If your window is 60 inches wide and you add 8 inches on each side:

60 + 8 + 8 = 76 inches rod length


Curtain Fullness Guide

Curtain fullness means how much extra fabric is used compared to the rod width. More fullness creates deeper folds and a more premium look.

Curtain typeRecommended fullness
Eyelet / grommet curtains2×
Pencil pleat curtains2× to 2.5×
Pinch pleat curtains2× to 2.5×
Wave / ripple fold curtains2× to 2.2×
Sheer curtains2.5× to 3×
Blackout curtains1.5× to 2×

Blackout Curtain Size Calculator

Blackout curtains need a slightly different calculation because they should cover more than the window opening. For better light control, install the rod higher than the window and extend it wider on both sides. Choose curtains that are wide enough to overlap the window properly and long enough to reach close to the floor or sill.

Best blackout curtain tips:

Use a wider rod, choose enough fullness, avoid narrow panels, and make sure the curtains extend beyond the window edges.


Ready-Made Curtain Size Guide

Ready-made curtains usually come in standard widths and lengths. The calculator helps you choose the closest ready-made size based on your window and rod measurements. If your result falls between two sizes, choose the larger size and adjust the hem if needed.

Common curtain lengthBest use
63 in / 160 cmShort windows
84 in / 213 cmStandard rooms
95–96 in / 241–244 cmTaller rooms
108 in / 274 cmHigh ceilings
120 in / 305 cmExtra tall spaces

Curtain Size Calculator in Inches and Centimeters

This calculator works in both inches and centimeters, so you can measure your window in the unit you prefer. If you are buying from a US store, inches are commonly used. If you are buying from a UK, European, or international store, centimeters and meters may be more useful.


Common Curtain Measuring Mistakes

Many people buy curtains that are too narrow, too short, or mounted too close to the window. This can make the room look smaller and the curtains look flat. For a designer look, measure the rod width, add enough side extension, choose proper fullness, and decide the curtain length before buying.


FAQs About Curtain Sizes

Add FAQs for user help, but do not depend on FAQ rich results. Google’s FAQ rich results are now limited mainly to well-known government or health sites, and Google’s FAQ documentation says FAQ rich results no longer appear in Search as of May 7, 2026.

What size curtains do I need?

For most windows, choose curtains with a total flat width around 2× the curtain rod width. Use more fullness for sheer curtains and slightly less fullness for heavy blackout curtains.

How wide should curtains be for a 60-inch window?

For a 60-inch window, a rod around 76 inches wide is often a good starting point if you add 8 inches on each side. With 2× fullness, you may need around 152 inches of total curtain width.

How long should curtains be?

For a clean designer look, curtains should usually hover just above the floor or lightly touch the floor. Sill-length curtains work better for kitchens, bathrooms, and small windows.

How much wider should a curtain rod be than the window?

A curtain rod should usually extend several inches beyond each side of the window. For blackout curtains or heavy curtains, use a wider extension to reduce light gaps and give the fabric space to stack.

Are eyelet curtains measured differently?

Yes. Eyelet curtains need enough width to create soft folds. Around 2× fullness is usually a good choice for eyelet or grommet curtains.


Bedroom Curtain Guide: Measure, Layer, and Hang for Better Sleep

Bedroom curtains do more than finish the room. The right size, fabric, and hanging height can darken the room for sleep, protect privacy, and make the window look taller and wider. This short guide covers the bedroom-specific choices the calculator above does not make for you: how to measure, when to layer blackout with sheer, where to mount the rod, how renters can hang curtains without damage, and the mistakes that undo all of it.

Measuring for a Bedroom Window

Measure the full window frame, not just the glass: take the frame width, then decide the rod position. For bedrooms, plan 8 to 12 inches of rod beyond the frame on each side so closed panels stack on the wall instead of the glass — that overlap also cuts side light leaks. Measure from your planned rod height straight down to the floor for full-length panels, or to the sill for short curtains, and note any sill, handle, or radiator the fabric must clear. Enter these numbers in the calculator above for panel count, rod length, and drop. For the full measuring walkthrough, see How to Hang Bedroom Curtains.

Blackout vs. Sheer Layering

One layer cannot do two opposite jobs. Sheers give daytime privacy while letting soft light in; blackout panels give night darkness. The bedroom sweet spot is both: hang a sheer closest to the glass and a blackout layer in front on a double rod or double track. Open the blackouts in the morning, close them at night, and keep the sheers drawn for privacy all day. If you already own curtains you like, a separate blackout liner behind them is the cheaper upgrade — compare both options in Blackout Curtains Versus Blackout Liners.

Rod Height and Extension for Sleep and Privacy

Mount the rod 4 to 6 inches above the window frame, or nearer the ceiling when there is enough wall — a higher rod makes the window look taller and leaves no gap for light to spill over the top. Extend the rod 8 to 12 inches past the frame on each side, more for blackout, so closed panels overlap the wall; that overlap is what kills edge light leaks and keeps daytime privacy. If you sleep during the day, these two choices matter more than fabric color — see Bedroom Dark and Quiet for Shift Work for the full darkness system.

Renter-Friendly Hanging

Renters can get the same look without drilling. A tension rod inside the window recess suits lightweight sheers and unlined panels; heavy lined blackout needs sturdier fixings, so check your lease and use proper anchors in a stud or wall plug where a small repair on move-out is acceptable. In small rooms, keep fabric light and close to the wall color so the window does not dominate, and use one wide panel per side rather than several narrow ones — fewer panels mean fewer light gaps.

What to Avoid

Avoid rods only as wide as the frame: panels then cover the glass when open and leak light when closed. Avoid panels that stop well above the floor unless a radiator or furniture forces it — short panels shrink the window visually and let light pool underneath. Avoid choosing blackout by color alone; a thin dark fabric can leak more light than a thick pale one with a proper backing. And avoid overloading tension rods or adhesive hooks with heavy lined curtains — a curtain that falls at 2 a.m. ruins everyone’s sleep.


Bedroom Curtain FAQs

How much fabric do I need for curtains?

For custom curtains, multiply your panel count by the cut length of one panel: the finished drop plus hem and heading allowance, rounded up to a full pattern repeat. The calculator’s new “Total fabric needed” readout does this math for you in yards and metres. Add about 10 percent extra if you are new to sewing or matching a large pattern.

How wide should curtain panels be?

Aim for a total flat panel width of about 1.5 to 2 times the rod width for a full look — around 2× for eyelet and pinch pleat, 2 to 2.5× for pencil pleat, and 2.5 to 3× for sheers. The calculator applies these fullness ratios automatically from your heading choice.

How high should I hang bedroom curtains?

Hang the rod 4 to 6 inches above the window frame, or close to the ceiling when there is enough wall above. Higher placement makes the ceiling feel taller and closes the light gap above the frame, which matters most in a bedroom.

Are blackout curtains good for bedrooms?

Yes — they are the simplest way to darken a bedroom for sleep, especially for light sleepers and shift workers. For the darkest result, hang them wider and higher than the frame and pair them with a sheer for daytime privacy. If you already own curtains, a blackout liner is a cheaper alternative; compare both in Blackout Curtains Versus Blackout Liners.

How can I hang curtains in a rental without drilling?

Use a tension rod inside the window recess for sheers and light panels, or removable adhesive hooks rated for the curtain weight. For heavier blackout panels, check your lease — a wall anchor in a stud with a small patch repair on move-out is often allowed. Our guide How to Hang Bedroom Curtains includes a rental-friendly setup.